You searched Milexia Products for : Regional availability: France

The Next Generation of 8″ Fully Rugged Tablets

Military-Qualified 1×8 GNSS Splitter

Ultra-Compact RTK GNSS Receiver for Autonomous Applications

High-performance industrial printer designed for cable marking, equipment identification, and traceability labeling. Its intelligent technology and intuitive operation help reduce setup time and improve productivity.

Portable industrial label printer delivering high-quality 300 dpi printing. Featuring Wi-Fi, Bluetooth, and LabelSense™ technology, it simplifies mobile labeling and automatic consumable setup, helping teams improve efficiency and productivity.

Designed for applications where reliability under the most demanding conditions is essential.

All-in-one, high-performance GNSS receiver module

High-Precision Full GNSS Spectrum Antenna

High Precision Full GNSS Spectrum Choke Ring Antenna

Lightweight, high-precision antenna for geodetic, survey and machine control applications

Reliable and robust base station GNSS receiver

Multi-frequency, multi-constellation GNSS Time and Frequency Transfer Receiver

Multi-frequency, multi-constellation Ionospheric Monitoring GNSS Reference Receiver

Battery powered multi-frequency, multi-constellation GNSS reference receiver

GNSS module with PPP-RTK corrections for Japan

Ready-to-use GNSS/INS single-board receive

High-precision inline automatic X-ray inspection system for the quality control of flip-chip assemblies and semiconductors, ensuring fast, reliable and reproducible defect detection during production.

A fast, hi-resolution automatic X-ray inspection system using laminography for the quality control of electronic components and semiconductors

The Rigaku XTRAIA MF-3000 (formerly MFM310) performs high-precision measurements not possible by optical or ultrasonic techniques.

The Rigaku ONYX 3200 is an automated system for high-sensitivity metal contamination detection using grazing incidence technology.

The TXRF-V310 is a high-throughput TXRF spectrometer with integrated VPD, delivering ultra-sensitive, automated metal contamination analysis across the entire wafer surface.

The VSCPL1210SG is a high-reliability COTS DC-DC converter designed for NewSpace applications. It features radiation-tested components, up to 10 A output capability, and robust performance validated for LEO missions and NASA Class D programs. Its optimized thermal design and radiation tolerance (up to 30 krad(Si) TID) make it ideal for cost-sensitive space systems requiring guaranteed reliability.

Integrated switch matrices ensure reliable signal routing with high performance and flexibility, combining mechanical and solid-state technologies for complex test environments.

2-in-1: High-safety cleaner and lubricant for all types of contact maintenance.

World’s first benchtop nanotomography system (nano-CT) designed to provide non-destructive three-dimensional reconstruction of the internal microstructure of objects with exceptional spatial resolution of 300nm

Benchtop X-ray microscope for non-destructive three-dimensional reconstruction of the internal microstructure of objects with micron spatial resolution.

Benchtop X-ray microtomograph (micro-CT) for non-destructive three-dimensional reconstruction of the internal microstructure of objects with a spatial resolution of 8µm

Large-chamber X-ray laboratory instrument (micro-CT) for non-destructive three-dimensional reconstruction of the internal microstructure of objects with a spatial resolution of 5µm

Automatic metal contaminant detection system using grazing incidence

Automatic thin film composition and crystallinity detection system

WaferLine is a fully automated ultrasonic wafer inspection system, delivering reliable and repeatable defect detection across the entire inspection process.

High definition CT X-ray Inspection System, designed for non-destructive testing of the most advanced electronic and semiconductor components. With an exceptional resolution of up to 0.16 µm, it enables detailed analysis of internal structures in both 2D and 3D.

Whether you’re on-site, in the workshop, or outdoors, the F110 G7 ensures reliable performance for all your mobile tasks. Rugged Design and Durability With an IP65 rating, the GETAC F110 G7 is resistant to water, dust, and harsh weather conditions. Its reinforced casing and metal chassis provide optimal protection against shocks, drops, and impacts. It can operate in […]

Getac F120 G1: AI rugged tablet w/ Intel Core Ultra, 1200-nit 12.2″ screen & -29°C to 63°C ops. Milexia across Europe

Unleash 40 GHz RF precision with HAROGIC PXN 400 Serie from Milexia Iberica. Portable, real-time analysis for Spain’s innovators.

The Getac V120 is a fully rugged 12.2” laptop designed for extreme environments. Featuring Intel Core Ultra processors, a 1000-nit sunlight-readable display, hot-swappable batteries and advanced connectivity.

Discover the advanced sealed, medical-grade, panel-mounted CliniKey™ keyboards for medical application from GRAYHILL.

Designed for those seeking high performance, robustness and ease of integration.

The Grayhill 60C is a compact joystick with integrated encoder and pushbutton. Rated for 500K cycles for aviation applications.

Rugged, enclosed GNSS positioning and heading receiver

Ultra-rugged GNSS/INS smart antenna

The TT250 is a 2.5M terminal that can operate in C, X, Ku, and Ka bands, providing flexibility and interoperability with various satellite networks.

High-performance programmable noise source for system-level testing, including BER, jamming, and satellite link simulations. Remote control via Ethernet/GPIB.

HAROGIC offers you with
reliable and precise spectrum
analyzer up to 40 GHz.

Radiall’s space offering includes a wide range of coaxial connectors with frequency coverage up to the Ka band. This includes ESA-qualified SMA and SMA 2.9 connectors, EPPL-listed TNC, SMP, and SMP-LOCK connectors, as well as SSMA and 2.4 mm connectors.

Radiall’s coaxial fixed attenuators offer excellent reliability and repeatability from DC to 67 GHz. It includes low, medium and high power attenuators, and a platinum range with the lowest VSWR dedicated for instrumentation applications.

Radiall coaxial terminations offer excellent reliability from DC to 67 GHz. The complete termination offer includes low, medium and high power terminations as well as a platinum range dedicated to instrumentation applications where low VSWR is required.

QuinStar offers a comprehensive solution to meet all your waveguide component and accessory requirements.

QuinStar offers a comprehensive solution to meet all your waveguide component and accessory requirements.

Phase Shifters are for precision millimeter-wave measurements

The Series SD5902 Waveguide Switch Driver is designed to control the Flann microwave range of Series 333-*E Precision Waveguide Switches.

Control Processor Model CP2021 controls all Flann programmable products including Rotary Vane Attenuators, Phase Changers and Polarizers.

Simplifies test setups by allowing synchronized frequency and power measurements from a single device.

Mini-Circuits signal generators: up to 12.5 GHz, advanced modulation, and remote control for high-precision RF testing.

Rad-hard solution designed for critical space applications.

2U, 2P Dell Military GPU server, powered by Intel® 4th/5th Gen Xeon Scalable Processors. Designed to meet MIL-STD-810 standards for shock, vibration, and extreme temperatures.

100G QSFP28 MXM RTX5000m GPU server powered by Xeon® 6 Granite Rapids D, 32 cores. IP65 sealed with external cooling blade.

IP65 chassis with D38999 connectors. Meeting MIL-STD-810 standards for thermal, shock, vibration, humidity, EMI and EMC. The AV600-RH-A45 supports up to 96GB DDR5 5200MHz SO-DIMM, non-ECC.

3U 1CPU 2GPU Liquid-to-Liquid VPX ATR. Advanced liquid-to-liquid cooling solutions (LOC) provide significant advantages for heat transfer, improving the efficiency and reliability of thermal management systems.

15″ rugged UAV targeting display with 20 programmable keys. Next-gen military-grade display for precision artillery targeting, featuring MIL-DTL-38999 connectors for enhanced battlefield durability and secure connectivity.

Qualified AEC Q200, the µCeramIQ line offers over 70 models available, including filters, splitters, hybrids and more.

Precise position, speed, and acceleration sensors for extreme environments, such as aerospace and military applications.

Multifunctional solution that integrates a directional joystick, rotary encoder and central button in one compact component.

Combine advanced technology, modularity, and regulatory compliance

high precision, robustness, and reliability for critical industrial environments.

CDA BLDC motors are deployed in spaceflight, military and commercial aircraft, downhole oil & gas operations where size and power density are essential.

Designed to adapt to evolving test needs.

Series 67B: Grayhill joystick ideal for applications where robustness and reliability are required.

The Swedish Microwave Ka-Band LNB is a well proven product with high reliability. For switching between 3 to 8 LO bands within 17.30-22.30 GHz.

Well proven product with high reliability. For reception of a single LO band within 17.30-22.30 GHz.

Well proven product with high reliability. Designed for simultaneous reception of Low & High Ku-Band 10.70-12.75 GHz.

Upgrade of the bestseller Ku Multiband (also known as Q-PLL) is build on our new innovative technology platform enabling new features and improved performance

The Swedish Microwave X-Band LNB is a well proven product with high reliability. It’s designed and optimised to meet market standards on performance.

The Swedish Microwave X-band LNB is based on a well proven technology platform. It’s designed and optimised to meet market standards on performance.

Ideal for aircraft,and unmanned vehicles, the RP-4EA3G1U3M5 device is MIL-STD, IP65 certified.

Designed with integrated filters providing isolation from interfering signals like 5G & WiMAX.

Interruptor batería bi‑estable 250A IP67 Littelfuse 08075062 – seguridad para camiones y marino con Milexia Europa.

1,0M – 5 segment Carbon Fiber antenna

2 cases – IATA compliant

Options:
Integrated BUC/LNB
High wind stabilisation kit
Sand feet
Ku and Ka-Band dual band
MPAD3 – Beacon receiver
Integrated IP Modem

The new SSG-8N12G-RC signal generator from Mini-Circuits, a well-known partner of Milexia Italy, covers the 8 to 12.5 GHz band, offering adjustable output power from -55 dBm to +23 dBm.

GETAC ZX10-EX G2: Fully Rugged, Intrinsically Safe Tablet for Hazardous Environments

GETAC X600 SERVER RAID: Rugged Mobile Server for Mission-Critical Applications

GETAC X600 PRO-PCI: Unmatched Rugged Performance with PCI Expansion

GETAC X600 PRO Laptop : Extreme Performance in a Fully Rugged Mobile Workstation

Getac Tablet UX10 G5: Rugged AI tablet w/ Intel Core Ultra, 48 TOPS, IP66. Milexia delivers Europe-wide for extreme field performance.

PTA-730 Tri-Fold system adopts a servo turntable with azimuth/elevation and tilt axes, effectively eliminating overhead blind spots and enabling continuous tracking with no coverage gaps.

The antenna, along with its RF equipment, is mounted on a trailer and automatically folds into a compact unit without the need for disassembly.

Transportable design enables one person deployment very easily.

PTA-370 Tri-Fold is a tactical trailer- or vehicle-mounted drive-away satellite antenna, designed for use across a range of applications and frequency bands.

PTA-240 Tri-Fold is designed for use across various applications and frequency bands.

Renowned for its reliability, the PAIR Series has proven effective on aircraft, ships, high-speed boats, and a wide range of military wheeled and tracked vehicles.

PMAR-100N-MIL Marine supports operation at either Ku or Ka with high precision satellite tracking.

PMAR-60N-MIL Marine integrates high-precision angle sensors, magnetoresistive sensors, a gyroscope, and a GPS antenna, enabling real-time environmental monitoring and continuous adjustment.

PMAR-45N-MIL Marine is purpose-built for maritime applications and features a 3-axis stabilisation structure.

Widely deployed across various military unmanned platforms, enhancing both the mobility and combat effectiveness of troops.

POMA-60N-MIL SOTM is ideal for a wide range of mobile applications

Drawing on extensive expertise in antenna design, PALS developed its Satcom-On-The-Move solution with reliability and mobility in mind.

POMA-45N-MIL SOTM antenna supports both Ku and Ka-band operations.

PDA-150-MIL Roof Mount meets military standards for precise auto-pointing accuracy, with excellent X-Pol and Co-Pol performance, delivering high EIRP and G/T values.

PDA-120-MIL Roof Mount is compact and designed specifically for military communications.

A portable 3.7m Earth Station, capable of operating in C, X, Ku, and Ka bands across various configurations.

PFA-240-MIL can be easily configured to provide instant satellite communications for any application requiring reliable or remote connectivity in rugged environments.

PMA 120-MIL Man Pack can be deployed in under two minutes and is ready for live operation immediately, with no integration tools or training required

PMA 100-MIL Man Pack features a 1.0m reflector and supports manual, automatic, and one-button satellite locking, enabling rapid setup within minutes.

The PMA-80 is one of the most compact models in the PALS Man-Pack antenna series.

PMA 60-MIL Man Pack is the most compact antenna in the PALS Man-Pack series.

Microchip Technology Inc. presents LN-CSAC: atomic precision in a compact format.

The PAIR Series is well-regarded for its proven reliability on aircraft, ships, high-speed boats, and a wide range of military wheeled and tracked vehicles.

The PALS PMAR-105 is purpose-built for maritime applications and features a three-axis stabilisation system.

The PMAR-100N is purpose-built for maritime applications and features a three-axis stabilisation system.

Equipped with high-precision angle sensors, magneto-resistive sensors, a gyro sensor, and a GPS antenna

Purpose-built for maritime applications, features a three-axis stabilisation structure incorporating high-precision angle sensors, magneto-resistive sensors, a gyroscope, and a GPS antenna.

POMA-60N ensures dependable real-time communication for military operations, robust connectivity for emergency services, and high-quality live broadcasting.

The POMA-55 provides high-performance, reliable, and secure satellite connectivity even while your vehicle is in motion.

Ideal for a wide range of applications, the POMA-45N delivers dependable, real-time communication for military missions, stable connectivity for emergency response, and high-quality live broadcasting.

Ruggedised type SOT PALS POMA-35SPL supports both Ku and Ka band operations and can simultaneously achieve Ku & Ka dual-band functionality without changing the feed.

Offers instant access to satellite communications across C, X, Ku, or Ka bands, ensuring reliable transmission for a wide range of applications, including DSNG, disaster relief, emergency communications, and network connectivity.

A fully motorised Gregorian offset antenna system featuring a 1.2-metre carbon fibre reflector and a precisely shaped carbon fibre pod that protects both the antenna and BUC from weather conditions, while also enhancing the vehicle’s aerodynamics.

A portable 3.7m carbon-fibre antenna system supporting C, X, Ku, and Ka bands. Designed for rapid deployment and high performance

A lightweight, portable satellite antenna system designed for rapid deployment in rugged environments. Compatible with Ku, Ka, X, and C bands, it delivers reliable connectivity for corporate, military, and emergency applications.

A compact, portable man-pack antenna designed for easy transport. Deploys in under 2 minutes and is instantly ready for live operation, no integration tools or training required.

3.5-inch CAN Bus Display with Ready-to-Use Engine Monitor. Designed to function as a J1939 engine monitor, already in Grayhill’s range.

Automated rotary pumped sputter and carbon coater

Automated rotary pumped carbon coater

Automated turbo pumped sputter and carbon coater

Automated turbo pumped carbon coater

Discover the DCNLH magnetic latching relay contactor from Littelfuse.

Model PMA5-123-3W+: excellent solution as a driver stage for pulse or linear systems with almost 30 dB gain.

Automated rotary pumped sputter coater

High resolution X-ray microtomography benchtop system (micro-CT) designed for accurate 3D scanning

Automated turbo pumped sputter coater

Designed for high-power converters, Exxelia Alcon Electronics Pvt Ltd’s IGBT snubber capacitors (MP-4, MP-4A, KPF and KPF-9 series) utilise a low-loss polypropylene film dielectric.

The X600 Pro offers hardware expansion with up to 6TB of storage, multiple ports, two card readers and a bay for DVD/Blu-ray or extra batteries.

This display is ideal for integrating into vehicle control systems, providing intuitive and robust operation under demanding conditions.

It is a versatile 7-inch touchscreen designed for off-road vehicle applications such as agriculture, construction, and mining.

Plots, saves and exports clock telemetry for real-time or post-processing data analysis.

DC-DC converters designed for extremely demanding space environments, the SGRB series from VPT, Inc. utilises state-of-the-art GaN technology in a radiation-resistant design.

3D35 CAN Bus Display was Designed to share design language and purpose with 3KG2 CAN Bus Keypads, already in Grayhill’s range..

Among the most innovative solutions is the RFS-2G42G5050X+: a high-power RF signal generation module designed to deliver superior performance in the 2400-2500 MHz ISM band.

High Resolution Schottky Scanning Electron Microscope

Orbit tracking antenna system for tracking inclined orbits in the C, X, Ku, and Ka bands.

IntelliShield Rugged UPS offers uninterrupted power protection, even in the most extreme environments. With double conversion technology, it ensures stable and reliable power for critical military, industrial, and sensitive applications, safeguarding your equipment from interruptions and fluctuations.

With a unique architecture, this new series offers advanced Ethernet networking, artificial intelligence and machine learning (AI/ML) capabilities, while providing unprecedented flexibility, fault tolerance, scalability and power efficiency.

The FA10449 is a compact, rugged 500W UPS with a LiFePO4 battery, offering 10 minutes of backup. ITAR-free and COTS-compliant, it delivers reliable performance in mission-critical environments with high-efficiency power switching and galvanic isolation.

The FA10003 is a lightweight, 800W portable UPS designed for mission-critical and battlefield applications.

The FA10448 is a rugged 2700W UPS designed for C5ISR Naval applications, offering 15 minutes of backup with an EBP, MIL-STD compliance, and ITAR-free status

A versatile and compact solution that replaces traditional user input devices such as switches, keypads, pushbuttons, and displays with a sleek, all-in-one interface.

The Flann 114 RVA is a commercial-grade, direct-reading rotary attenuator designed for use in millimetre-wave test sets.

Scanning acoustic microscope

L’écran CAN Bus 3D35 de 3,5 pouces de Grayhill est une solution d’affichage polyvalente basée sur le réseau CAN, idéale pour les véhicules agricoles et les engins de construction. Il intègre des jauges virtuelles, des menus de diagnostic, des systèmes de surveillance moteur, des fonctions de commande opérateur, des indicateurs de défauts ainsi que des rappels de maintenance.

Grayhill’s 3D35 3.5-in CAN Bus Display is a versatile CAN-based display ideal for agriculture and construction vehicle applications, including virtual gauges, diagnostic menus, engine monitors, operator input, fault indicators, and service reminders.

Multi-band, multi-orbit manpack terminal

Mini-Circuits, a long-standing partner of Milexia, offers the most advanced RF cable technology.

Mini-Circuits RF Energy via Milexia: Solid-state up to 25kW ISM. Precise control for heating/plasma in Euro industry.

Microchip FTS and his the SyncServer® S600 Time Server: a fundamental source of Trusted Time.

Vista 300 is the most advanced nano-chemical meteorology instrument for R&D and failure analysis in nanofabrication.

A new modular safety unit and integrated PDU, nVent’s Rack Safety Plus is designed to protect and power electronics enclosed in 19″ cabinets.

RatiopacPRO Style from nVent revolutionises the way desktop cases are customised.

Getac S510 G1: AI semi-rugged laptop w/ Intel Core Ultra, 15.6″ 1000-nit screen & -29°C durability. Milexia Europe-wide.

With its expansive 600 x 600 mm travel range and certified semiconductor characterization, this system ensures consistent and reliable performance. Equipped with advanced 3-in-1 technology, it delivers unparalleled measurement versatility, making it the ultimate solution for large-panel applications in semiconductor, display, and PCB industries

Nodka Fanless Industrial Panel PC is the fanless industrial Panel PC resistive touchscreen with PET film. IP65 water and dust proof panel, stylish enclosure, and reliable modular structure.

New ZVA-18443VG+ wideband, variable gain amplifier from Mini-Circuits.

The S lynx 2 is a compact and versatile 3D optical system for roughness, volume, and critical dimensions measurements.

NODKA Industrial Operation Panel, support Rittal® CP40 Swing ARM, has control box with industrial computer system and display.

La gamme de joysticks de précision Grayhill est idéale pour les applications industrielles et marines, notamment les systèmes de commande à distance, les pupitres de contrôle industriels et les panneaux de simulation.

Mini-Circuits is expanding our wide selection of ZVBP-Series cavity bandpass filters to encompass the mmWave range.

Le microscope à force atomique Vista 200 est une solution avancée spécifiquement conçue pour l’analyse des semi-conducteurs.

nVent Outdoor Modular Cabinets by Milexia: IP55 double-wall vs weather/vandalism. Telecom/rail ready for Europe-wide use.

DR-100 est un nettoyant désinfectant concentré, offrant une solution efficace et neutre sans phosphate.

DR-200 est conçu spécifiquement pour répondre aux exigences strictes en matière de désinfection et d’assainissement.

Ce produit offre une solution efficace pour éliminer les germes, les bactéries et les contaminants nocifs sur les surfaces en contact avec les aliments, garantissant ainsi un environnement propre et sûr pour la préparation et le service des aliments.

Le DR Thym™ est homologué par Santé Canada avec le numéro DIN 02498669, garantissant ainsi sa conformité aux normes de santé et de sécurité les plus strictes.

Nu-Compact Kleen est un purificateur d’odeurs biotechnologique hautement concentré, spécialement conçu pour éliminer les mauvaises odeurs à leur source.

Nu-Odor est un contrôleur d’odeurs biotechnologique révolutionnaire, prêt à l’emploi et extrêmement performant.

Le dépoussiérant sans résidus CRC Gas Duster offre une solution efficace pour éliminer la poussière et les particules indésirables sans laisser de résidus

Dépoussiérant ininflammable EXTRÊMEMENT PUISSANT pour toutes les applications dépoussiérantes.

Nettoyage, désoxydation, lubrification et protection des contacts électriques.

Traitement anti-humidité et anticorrosion pour équipements électriques. Forme un film qui repousse l’eau, et protège durablement les équipements.

La mousse nettoyante assainissante et désodorisante en aérosol est un produit polyvalent conçu pour répondre à une multitude de besoins de nettoyage dans divers environnements.

Graisse au complexe d’aluminium pour conditions extrêmes, spécialement formulée pour les équipements de construction et d’industrie lourde.

Prolonge la durée de vie des roulements et améliore les performances de la graisse.

Huile de réducteur multigrade formulée pour les équipements de construction et pour les équipements d’industrie lourde.

Avec une tenue exceptionnelle sous extrêmes pressions, K Nate protège contre les charges élevées, les températures élevées, la corrosion et le lavage à l’eau.

L’Onduleur KEOR T EVO est une système d’alimentation triphasée sans interruption (ASI), On-line Double Conversion, capable de fournir avec continuité la puissance nominale de 10-15-20-30-40-60kVA. Il est également disponible dans une version compacte avec une gamme de puissance de 10-15-20 kW.

Megaline, onduleur rack monophasé pour applications IT (serveurs téléphonie…), automation industrielle, applications critiques en envionnement industriel/civil (systèmes de sécurité…).

Megaline, onduleur rack monophasé pour applications IT (serveurs téléphonie…), automation industrielle, applications critiques en envionnement industriel/civil (systèmes de sécurité…)

Megaline, onduleur rack monophasé pour applications IT (serveurs téléphonie…), automation industrielle, applications critiques en envionnement industriel/civil (systèmes de sécurité…)

Megaline, onduleur tour monophasé pour applications IT (serveurs téléphonie…), automation industrielle, applications critiques en envionnement industriel/civil (systèmes de sécurité…), a associer à des batteries dédiées

Convertisseur DC/DC, capable de transformer une tension d’entrée continue en une tension de sortie continue différente.

Ce dispositif est un convertisseur DC/DC, capable de transformer une tension d’entrée continue en une tension de sortie continue différente.

En combinant performances de pointe et facilité d’utilisation, le contacteur AF offre une solution polyvalente et rentable pour garantir la continuité des opérations industrielles

The VSC100-2800S Series is a commercial off the shelf DC-DC converter designed for the ‘NewSpace’ market.

LEO MEO GEO Flat panel

1 case

Features:
Fully integrated satellite terminal.
Electronically scanned pointing and tracking.
Mesh networking of several devices supported.
Ka band for LEO/MEO/GEO operation.
Modem integrated for internal or external installation.
Operational temperature range -20⁰C to +55⁰C

Compact glow discharge system

Lightning Protection for CPI 1.8, 2.4 and 3.8 meter Antenna

Protection Unit

AFC Radomes’ are a weatherproof geodesic prefabricated building structure that protects radar and antenna systems from extreme weather: wind, blowing sand, snow, ice, rain, ultra violet sunlight, temperature, fungus and corrosion.

The BJES10 Q-band Redundant LNA system

Q-band LNA, intended for use in modern solid state communication equipment

LC-4000 Series has been specially designed for satellite earth station receiver front ends and other telecommunications applications

Compact, lightweight IoT terminals that feature a tightly integrated satellite modem and flat-panel antenna design in Ku- and Ka-band variants.

C, X, Ku and Ka-Band

Ku-Band 200W/250W Block Up-Converter (BUC)

Single/Dual Ka-Band LNB

Ku-Band 1:1 switching system

Ka-Band Satcoms-on-move (SOTM) Antenna System

Low profile design (waveguide array)
Tuneless architecture
Wide-band performance (19.2-21.2 GHz and 29-31 GHz)
40W BUC

The VXR100-2800S is optimized for a broad range of applications from military ground vehicles to commercial and military aircraft and is intended for harsh environments including severe vibration, shock and temperature cycling.

With the lowest output ripple of converters in this size and power class, plus 20% more power delivered in a standard package, the DVSA Series is a smart choice for any demanding application.

The VSC5-2800S Series is a commercial off the shelf DC-DC converter designed for the ‘NewSpace’ market.

Thermopad® products are a totally passive, easy to implement solution for gain compensation designed specifically for demanding high reliability applications.

PolaRx5 is a versatile and robust multi-frequency GNSS reference receiver. The unique design of its tracking provides measurements with the lowest noise on the market while constantly monitoring and protecting against interference, multipath and other environmental effects. 

AsteRx SB3 Pro is a multi-frequency GNSS receiver delivering centimeter-level RTK positioning in a rugged IP68 enclosure. Built to operate in the toughest environments, this receiver features the latest algorithms for extensive signal tracking even under heavy vibrations or shocks.

AsteRx-i3 D Pro+ delivers reliable centimeter level positioning combined with 3D orientation in demanding environments. Its onboard inertial sensor provides orientation and positional dead reckoning, making it ideal for systems that require continuous positioning even during short GNSS outages. AsteRx-i3 D Pro+ is the most flexible GNSS/INS solution offering full access to raw GNSS and […]

With dual-antenna input, mosaic-H™ provides precise and reliable heading combined with centimeter-level RTK positioning. Dual antenna heading capabilities in such a small form factor opens the door to advanced automation and navigation performance in both static and dynamic states, with reduced power consumption.

The PolaNt* MC.v2 is a lightweight, sturdy high precision geodetic multi-frequency multi-constellation antenna for use in physically demanding applications. PolaNt* MCv.2 is compatible with the PolaRx/AsteRx family of high performance multiple-frequency GNSS receivers. This high-gain antenna incorporates a low-noise amplifier, and is built into a rugged and environmentally sealed housing with aluminum bottom plate.

AsteRx-i3 S Pro+ delivers reliable centimeter level positioning combined with 3D orientation in demanding environments.

The Septentrio Mosaic-X5 integrates 448 hardware channels for simultaneous tracking of all GNSS constellations.

The CLT-1000 & CLT-1000R digital interface tabletop controllers (previously known as Unicom®) are designed to access and control all functions of our line of Pan and Tilt positioners including some sensor payloads.

Positioner products that leverages the strength and reliability offering new advantages to mission critical applications.

The P1600 and P1800 represent the industry standard in camera poles. They are rugged, corrosion resistant, and designed to meet common requirements for aesthetics.

Functional, durable and fully reliable for industrial and military support systems.

The Taurus-R pan-tilt positioner is engineered to properly handle co-located radars with EO/IR and other sensors.

Quickset’s Mercury camera system is the perfect solution for capturing video at medium ranges. The system is a purpose built package with a mid wave infrared (MWIR) sensor using a continuous zoom 550 mm optic, a 785 mm optic and a 500mm continuous zoom near infrared (NIR) sensitive day/night camera

The Series 41-5 features a narrow profile ideal for densely populated enclosures, and is light weight making it ideal for aerospace.

nVent 340 Wedge‑Tainer hybrid wedge‑lok secures and cools PCBs in rugged cold wall or sheet‑metal chassis, aligned with VITA 48.2 and SOSA.

nVent 263HC Card-Lok: lightweight, narrow shafted design with 911 lbs clamp force for dense PCBs in cold wall enclosures.

Sawtooth profile design that provides superior thermal dissipation and protection in high shock and vibration applications.

BIG PROTECTION FOR SMALL FORM FACTOR ELECTRONICS. nVent SCHROFF will provide you the optimal enclosure solution: a variety of small form factor and rugged solutions to connect and protect your electronics.

Applied Avionics standard and rectangular panel plugs: cover panel openings, facilitate installation, and improve aesthetics and protection.

GPSRHL18 GPS Source: 8.75″ Antenna Hood for GPS testing without repeaters, with variable attenuation 0-30dB

Rugged GNSS-3A Active Antenna for GPS/GLONASS/Galileo in extreme conditions – precision PNT via Milexia Europe.

E-FLO-M provides a single platform for distribution of PNT data with port independence. Each PNT device that is plugged into the ED3 has full control over the port from the ED3, as if the device has its own DAGR.

The GridTime™ 3000 GNSS time server is a software-enabled solution that provides enhanced levels of redundant, secure and resilient timing for power utility substations. It generates precise time and frequency signals to synchronize analog and digital communication systems within the substation.

IP Broadcast solution from Milexia and SES

A new experience of dynamic high-end connectivity services

Power data-intense applications anywhere they’re needed.

Blocking, Non-Blocking, Full Fan-Out

4 Channel Variable Gain Amplifier & 12 Channel Amplifier System

Single, Four, Eight Channel Modules & Multi-Channel Attenuation Systems

Compact Switch Modules & Rack-mount Switch Systems

USB / RC Series & ZT Series

Modular Test Systems

The latest evolution of the IBUC has all of the advanced features and reliability of the original IBUC in a new, more compact package available in Ku-band, 8W to 16W

5W-125W Mid-Power BUC from Milexia partner Terrasat.

Ku-Band Dual Band LNBs from RevGo

20W Ka-Band BUCs from RevGo

20W Ka-Band BUCs from RevGo

6W, 10W Ka-Band VSAT BUCs from RevGo

20W, 40W C-Band Block Up-Converters (BUC) from Milexia partner RevGo

The ARF2103 is a Monolithic Microwave Integrated Circuit (MMIC) Phase Shifter. Between the RF input and output port, the RF signal can be shifted in phase over the full range of 360 ° in 63 steps of 5.625 ° per step.

The ARF2101 is a Monolithic Microwave Integrated Circuit (MMIC) Phase Shifter. Between the RF input and output port, the RF signal can be shifted in phase over the full range of 360 ° in 63 steps of 5.625 ° per step.

Altum RF designs and develops a broad range of high performance RF products for commercial and industrial applications, with strategic roadmaps to rapidly expand our product portfolio.

Plug-Memory ATEK memories: robust EEPROM tokens with secure mounting, IP65 rating, for reliable data transfer in industrial environments.

ATEK Memory Key Series: robust electronic keys, EEPROM and Flash, secure and durable for identification and data transfer.

ATEK Bar Memory Tokens: robust portable EEPROM memory with SPI, 2Kb to 256Kb, MIL-STD-810, ideal for demanding industrial applications.

TPV protective plug with brass eyelet for ATEK receptacles, prevents dust and dirt without affecting IP rating.

SlimLink Development Kits ATEK: complete kit with programmer, receptacles, memory samples, and source code for Windows.

High performance low noise amplifiers (LNA) and driver amplifiers for commercial and industrial applications, using proven technologies GaAs or GaN

Altum RF designs and develops a broad range of high performance power amplifiers for commercial and industrial applications, with strategic roadmaps to rapidly expand their product portfolio.

SlimLink III Programmer ATEK: USB reader/writer for SlimLine EEPROM tokens, 4Mbps read speed, Windows compatible.

ATEK SlimLine receptacles: robust panel/board connectors with gold-plated contacts, 50K cycles, IP65/IP67 rated, for portable tokens.

nVent Board Retainers & Extractors: AS9100D rugged Card-Loks, extractors for VITA/SOSA PCB systems in defence & aerospace.

ATEK SlimLine memory tokens: ultra‑rugged EEPROM/NOR flash tokens, redundant contacts, six colors, SPI/I2C/Microwire.

nVent Systems & Components: PICMG/VITA chassis with conduction cooling, EMI shielding for defence, rail and high-data-rate apps.

Standard square sealed protector for VIVISUN switches. Maximum protection against liquids and dust in demanding applications.

Standard square unsealed protector for VIVISUN switches. Easy installation, basic protection, and a variety of colors.

Design your electronics cabinet.

Conversor NEXSYS® SR429/1: convierte señales ARINC 429 en 23 salidas discretas. Sin software, fácil integración y alta flexibilidad.

NEXSYS LYNK: integrated signal processor that combines control, power, and communication in a single intelligent module.

Electro-optical system with four PMP and one RPU that manage display, tactile control, and communication with the main computer.

VIVISUN switches and indicators: MIL-SPEC design with LED lighting, high customization, and reliability for aviation applications.

Line Replaceable Unit (LRU) motor controllers for demanding high reliability aerospace applications

3.8 Metre VSAT Rx/Tx Antennas

2.4 Metre VSAT Rx/Tx Antennas.

1.8 Metre VSAT Rx/Tx Antennas

Integrated hybrids and 3D multi-chip modules

Rad Hard Banks Memory

Rad Hard (128K x 8-Bit)

NAND Flash PDC 64-256 Gb SLC: RAD-PAK rad-hard >100 krad, bus x16 para misiones espaciales. ¡Fiabilidad orbital!

3.3V ABT Octal Bus Transceiver

Single Board Computer for Space

The RRMS116 Rack-Mount Splitter is a one-input, sixteen-output GPS L1/L2 signal divider that is 2U high and fits within a standard 19” rack.

Indoor GPS coverage for mission‑critical platforms with the GLI Echo II 1×1 “Smart” Repeater, supported by Milexia’s European experts.

GPS Amplifier Assembly, GPS Antennas, Cabling, Options & Accessories.

QMA

Combination Synchro-to-Digital and Digital-to-Synchro

VME synchro card fully independent Synchro-to-Digital or Resolver-to-Digital conversion

3.3V/5V Universal Signaling

GPS Source METRO-G-RK-F12

Space Camera Head with embedded SWIR image sensor and High performance FPGA-based architecture.

General-purpose diode for high-speed switching

HiRel Discrete and Microwave Semiconductor For low noise, high-gain amplifiers up to 2GHz. For linear broadband amplifiers Specified 1/f Noise Hermetically sealed microwave package fT= 8 GHz F = 2.3 dB at 2 GHz Type Variant No. 08

Radiall offer an extensive range of interconnect solutions for the telecommunications, aerospace, space, defence, automotive, industrial, medical and instrumentation industries

Quarter-turn, a metal high-reliability circular connector for power and signal use including GbE

Size 11 and size 19 composite circular connectors

Quarter-turn, economical circular connectors

Low-profile, stackable power connector

Optical Encoders and Hall Effect Products

Rotary Switch, 5 Position, 2 Pole, 36 °, 200 mA, 115 V, 56

World’s smallest, ultra low power, fully integrated MIL-STD-1553 BGA package
Fully Integrated 1553 Terminal with Transformers Inside

A wide range of microwave attenuators both as COTS and as customized products.

13 MHZ TO 5.8 GHZ | UP TO 1.7KW

eVNA: 6 GHz USB Vector Network Analyzer

A low cost, compact sensor-head that turns any PC with a USB port into a true RMS power meter for CW (continuous waveform), modulated and multi-tone signals.

SPDT, DPDT (transfer), SP4T, SP6T, SP8T, and SP10T mechanical and solid state RF switches

Reliable dissipation of signal power for 50-Ohm and 75-Ohm systems from DC to 65 GHz.

Voltage Controlled Oscillators (VCOs) from spot frequency and narrow band to medium and wide bandwidths

Low-Pass, High-Pass, Band-Pass, Band-Stop, Diplexers and Triplexers

For gain flattening and frequency-dependent loss compensation in a wide range of applications

Wideband DC blocks with SMA, N-type, BNC and 2.92mm connector types

High density connectors for rack & panel or board-to-board applications

Robust connectors for rack & panel applications

Provide enhanced protection and increased functionality to D-sub connector systems

Feedthroughs for vacuum applications

Help prevent unwanted wear during testing or act as gender changers

Stacked right angle D-subs to save panel and board space

For applications requiring IP65/IP67 waterproofing characteristics

MIL-DTL-24308 Connectors

Mixed density D-sub to mix signal/power/coax/HV and fiber optic

High Density D-subs family

Standard density D-subs with size 20 machined contacts

Directional, bi-directional, dual-directional and RF Taps

Positronic PLZ Series AutoShunt from Milexia: 6-pole CT shorting safety. Ideal for power metering in Euro industrial setups.

An innovative alternative to CT shorting blocks

Coaxial and surface mount bias tees for DC current up to 5 Amps and RF bandwidths spanning 100 kHz to 54 GHz

Shrouded, touch-safe power connectors

Amplifiers used in RF and microwave systems to boost signal power from input to output.

Stellar blind mating, mixed density connector with robust housing

THE PICMG 3.0 AdvancedTCA Zone 1 connector of choice

Plug-in power interface for CompactPCI and related platforms

An extreme power connector capable of up to 200 amps per contact

An economical, miniature power/signal connector family

High-reliability power & signal connector with metal shell

A range of lightning protection for cables at a variety of frequencies

Ensure precision testing with Times Microwave Systems’ test and measurement cable assemblies.

A wide variety of connectors to meet even the most exacting electrical and mechanical requirements

A broad range of cables and assemblies including custom assemblies

Winmate’s line of vehicle-mounted computers is designed to provide efficient and accurate inventory management for warehouse and logistics operations

Rugged Tablets are specially designed to meet the stringent hygiene standards required in healthcare facilities

Zone 2 and Class 1 Division 2 certified panel computers for hazardous environments in the refining and petrochemical industries.

Specifically designed to meet the demanding requirements of hazardous environments

Full Size Single Board Computer

VPU Accelerator

FPGA Highest Performance Accelerator Card

Optimizing AI Inference, Easy AI Deployment, Hard Real-Time Computing

Extreme field performance

Portable and powerful field computing

High precision field mobility

A powerful 10-inch Windows tablet

Emcon and SST Brand High Performance 7RU shielded Cabinet

The most advanced, efficient, lightweight and rugged Windows tablet that is purpose-built for Zone 1 / Division 1 hazardous areas.

Feedstock And Compliance Tracking System

1.2 Metre VSAT Rx/Tx Antennas available in X, Ku and Ka Band

The 5071B primary time and frequency standard is a replacement for the 5071A that matches the form, fit and functions of its predecessor.

Fully Automated Multi-Technique Scanning XPS/HAXPES Microprobe

Scanning Auger Nanoprobe

Parallel Imaging MS/MS

Loads and terminations ranging from those designed to be integrated into isolators to stand alone component

Surface Acoustic Wave (SAW) devices

Single Particle/ Tomography/ Micro ED

Megapixel CMOS TEM Camera

Glow Discharge System for TEM Grids and surface modification

Similar to the IBSS MCA but distinguished by turbomolecular pressure & speed.

Mobile station for EM sample and chamber cleaning.

Downstream Plasma Technology for Cleaning TEM Samples on Carbon Films

Cryo preparation system for SEM, FE-SEM and FIB-SEM

The Quorum K850 combines versatility and ease of operation with built-in thermo-electric heating and adiabatic cooling allow precise temperature control.

Triple target sputter coater for specimens up to 200mm diameter

Dual target sequential sputtering for specimens up to 150 mm diameter

SEM Peltier Heating & Cooling

Unsurpassed Performance with Ultimate Flexibility

The original PiF microscope for nano‑IR chemical analysis.

Ultra High Resolution CMOS TEM Camera

Retractable transmitted electron detectors with Bright Field (BF-STEM) and Dark Field (DF-STEM) modes.

The MDM6100 Broadcast Satellite Modem is the next generation DVB compliant modem specifically designed for broadcast applications.

The Newtec MDM5010 Satellite Modem is a very high throughput modem capable of handling traffic up to 1.2 Gbps in a shared bandwidth mode.

Hydrocarbon compounds surface decontamination

The MDM2510 is a compact, low power consumption modem, perfectly suited to service Small Office and Home Office customers and SMEs.

Low cost Passive and Passive Self-Pumping Dehydrators

Low pressure Air Dehydrator for indoor and outdoor applications

The Mission Microwave Ka-Band 12 watt Dart BUC provides 12 watts of rated power in a a 2.4 lb package.

Ku-band Tracking Receivers have been designed to track and measure pilots or beacons of all known commercial and military satellites.

Novella SatComs B650 Series X-band Tracking Receiver have been designed to track and measure pilots or beacons of all known commercial and military satellites.

Novella SatComs B550 Series – C-band Tracking Receivers have been designed to track and measure pilots or beacons of all known commercial and military satellites.

Entry Level Coater

Radiation tolerant

Surface mount box

Radiation-resistant

Standard hermetic power mosfets

AC/DC 4000W Configurable Product

S-band Tracking Receiver for antenna tracking of NATO / Skynet / DSCS military beacons.

L-band Tracking Receiver for antenna tracking of NATO / Skynet / DSCS military beacons.

UHF Tracking Receiver for antenna tracking of NATO / Skynet / DSCS military beacons.

LNBs from Swedish Microwave for Professional satellite communication to meet the highest demands.

Norsat’s range of LNB’s include single and multi LO (Local Oscillator) across C, Ku, Ka, X and Q-band frequencies.

Ka-Band Dual Band LNBs from RevGo are produced to stringent quality standards using an ISO9001:2015 quality system.

40W, 60W, 80W, 100W, 200W, 250W Ku-Band – SNG/earth-station BUCs from RevGo

16W, 30W, 40w, 60W Ku-Band BUC’s from RevGo are produced to stringent quality standards using an ISO9001:2015 quality system.

3W, 4W, 6W, 8W Ku-Band VSAT BUCs from RevGo are produced to stringent quality standards using an ISO9001:2015 quality system

5W, 8W, 20W, 40W C-Band Block Up-Converters (BUC) from Milexia partner RevGo

For sensitive specimens on high resolution SEM

A dual-purpose modem. The H-Plus can be used as a Point-to-Point SCPC modem or can be purposed as a mid-tier Heights Remote Gateway.

A dual-purpose modem that can be used as a Point-to-Point SCPC modem or as a mid-tier Heights Remote Gateway.

Remote Gateway – Low to Medium Throughput, for Dynamic SCPC mode of operation, upgradable to H-DNA

Supports multiple remote to hub throughput tiers up to 10 Mbps, which is managed via a centralized licensing capability.

An ultra-light uplink solution from Milexia that can be used with our range of Eutelsat FLY/DRIVE broadcast uplink solutions.

Networking Platform from ComTech is engineered to elevate your services with unparalleled horsepower, efficiency and intelligence.

Supports a wide range of fixed IP services, including Internet/ intranet access, VoIP, enterprise connectivity, maritime and multicasting services.

Los convertidores descendentes de bloque se utiliza normalmente para la traducción de frecuencia de (hacia) la banda L a (desde) SHF (bandas C, X, Ku, DBS y Ka).

Los convertidores ascendentes de bloque se utilizan normalmente para la traducción de frecuencia de (hacia) la banda L a (desde) SHF (bandas C, X, Ku, DBS y Ka).

Los convertidores reductores de frecuencia de Novella SatCom se basan en un módulo de banda L a VHF (70 o 140 MHz) construido en una sola PCB.

Los convertidores ascendentes de frecuencia de Novella SatCom se basan en un módulo de VHF (70 o 140 MHz) a banda L construido en una sola PCB.

Advanced Platinum RF Over Fiber platform, houses Digital Control for RF links, embedded optical/RF power meter, 12/24 ‘hot-swap’ modules per 3RU chassis

Foxcom’s Classic Gold RF Over Fibre platform, provides Gold Standard in reliability and performance

The Teledyne -Flex modem is a flexible software-defined modem, any waveform, any interface, IF and L-band, and data rates to 200Mbps

The iQ 200 Rackmount combines high-performance iQ series features with mobility and can reach throughputs over 300 Mbps when being used in L2oS mode.

A compact, low power consumption modem

Models for antenna tracking of NATO / Skynet / DSCS military beacons

Il modulo di interfaccia antenna (AIM) di Holkirk è un ACU completamente mobile progettato per essere facile da usare, che guida gli utenti passo dopo passo attraverso il processo di acquisizione.
Questo ACU può essere fornito come parte di qualsiasi antenna Holkirk o come retrofit per sistemi di antenna esistenti nell’ambito di un progetto.

Holkirk TP150 è un sistema flyaway ultraportatile da 1,5 m progettato per un rapido dispiegamento in ambienti difficili. È ideale per applicazioni governative e militari, DSNG e altre applicazioni di trasmissione mobile in cui affidabilità e velocità sono fondamentali per garantire prestazioni ottimali.

1,0M – 7 segment Carbon Fiber antenna

2 cases – IATA compliant

Features:
Integrated BUC/LNB
Sand feet
X, Ku and Ka-Band
Up to 100W RF Power
MPAD3 – Beacon receiver

MiFID II UTC Traceability Certification – TymCheck

GPS / GNSS Antenna Installation

SLA Next Day Hardware Replacement

24 ports, 90W, IEEE 802.3bt-compliant indoor PoE midspan

Punto intermedio PoE interior de 24 puertos, 30 W, conforme a IEEE 802.3at, gestionado

Familia de Punto Intermedio Multi-puerto Cumplidora de 802.3af con Sistema de Gestión de Red

24-port, 60 W, Multigig PoE Midspan compliant with the IEEE 802.3bt standard.

Rapid, Multi-function, Precision Oscillator Characterization

Microchip 9611B switch & distribution system is an intelligent switching, monitoring distribution system, packaged in a 1U rack-mount chassis

The Microchip 4036B-R is a one input, fifteen-output RF distribution amplifier in a 1U chassis.

The Microchip 4033A-R is a one-input, fifteen-output pulse distribution amplifier in a 1U, 19-inch rack mount chassis.

Small 1588 PTP GM for Outdoor Scenarios

Microchip’s bc637PCI-V2 timing module provides precise time and frequency to the host computer and peripheral data acquisition systems

Microchip’s bc637PCIe PCI Express timing module provides unparalleled precise time and frequency to the host computer and peripheral systems.

Processore di Tempo e Frequenza PCI Express

PCI Time and Frequency Processor

A stable and accurate frequency reference with multiple output signal formats in a 1U rackmount chassis.

Microchip MHM-2020 has enhanced the unique Auto-Tune design of the MHM-2010 by re-engineering the electronics to attain even better stability.

The Microchip CsIII is a lightweight, compact, economical cesium frequency standard.

5071A Cesium Standard – Precise, stable, and capable of delivering extremely predictable time and phase over long periods.

Microchip TimeProvider 4100 Precise Timing Grandmaster with Gateway Clock, PRTC-B, High-Performance Boundary Clock, Enhanced PRTC & Redundancy

60cm – 6 segment Carbon Fiber antenna

1 case – IATA compliant

Features:
Integrated BUC/LNB
Sand feet
Ku-Band
Up to 16W RF Power
MPAD3 – Beacon receiver
Integrated IP Modem (IQ200/MDM2510)

MAC-SA5X: Rubidium atomic stability in a mini, low-power format for critical applications. Nanosecond synchronization!

Microchip Technology Incorporated’s Quantum™ SA.45s CSAC is the world’s first commercially available chip scale atomic clock

The TPP 30A-J AC/DC power supplies feature a reinforced double I/O isolation system according to medical safety standards IEC/EN/ES 60601-1 3rd edition for 2 x MOPP approved for an operating altitude of 5000 m.

Dedicated to medical or industrial applications, the power of the encapsulated switch mode power supplies ranges from 2 to 100W.

These power supplies have a very compact format which facilitates their integration into your electronic equipment.

A reliable power source for sensitive loads in industrial process controls, machine tools and other equipment exposed to a difficult industrial environment.

AC/DC Rail-Din power supplies which are suitable for rugged industrial applications.

Analyze samples in the SEM without contamination

The latest generation of Hitachi ion polishers are suitable for large surface preparation.

non-contact 3D optical profilometer Sensofar S neox

Combined X-axis gyroscope and 3-axis accelerometer (+/-2g)

Accelerometer 1 axis

Accelerometer 1 axis

2-axis digital accelerometers

High-precision 3-axis digital accelerometers

High-precision 3-axis digital accelerometers

High-performance 3-axis accelerometer

3 axis gyroscope, ±125°/s

1 axis gyroscope, ±300°/s

1 axis gyroscope, ±100°/s

Protection of electrical circuit

Installation and replacement of fuses

Digital inclinometer with 3 axes

Digital inclinometer with 1 axis

A reed relay combines a reed switch with a coil in a single package to serve as a smaller and more power-efficient alternative to other types of relays. These relays are well suited for use in automated test, safety, medical and process control equipment. Customization options are available.

The largest choice of magnetic reed switches.  Reed switches are available in bare glass or in overmolded packages with a variety of mechanical, electrical and magnetic characteristics. Customization options, such as lead cutting and forming, are available.

With a wide range of blade sensors for proximity, level, speed and flow detection. Our reed switch sensors use the latest technology in reed switches, packaged in a variety of capsules suitable for a wide range of applications. Customization options are available.

Our selection of Hall-effect products includes digital, analog, and rotary/angular sensors suitable for a wide variety of applications, including speed and direction sensing. Customization options are available.

This custom-made cable harness is composed of 4 Hall effect sensors.

Milexia cuts, shapes and bends the exit tabs according to the customer’s needs, in order to guarantee the hermeticity and sensitivity of the contact.

The sensor is used as a safety system to measure the pressure and to trigger an alarm.

The sensor measures gas and water consumption in the meter, allowing information to be sent to customers.

Non-contact sensors are used in alarm systems to detect the opening or closing of doors and windows: a magnet on the moving part and a sensor on the fixed part.

The anemometer is equipped with a magnet which counts the revolutions of the propeller by closing the reed contact and thus determines the wind speed.

Level sensors that are reliable, hermetically sealed, waterproof, and do not consume energy.

Heavy Duty Modular Coupler

Robust Modular Rectangular Connectors

This line of connectors offers a range of reliable filtering options

The highest performance filtering for all types of professional, high-reliability applications. 

Filter capable of 70 dB from 1 GHz to 6 GHz in a D-sub connector adapter form-factor.

Versatile, high-current, mixed density

High Power in a Compact, Economical Package

High-power, quick-release circular connectors.

El conector de línea de potencia con filtro EMI incluye filtrado EMI integrado en modo común y en modo diferencial.

Mechanical encoders combine the feel of rotary switches with a digital output.

Optical encoders that provide excellent tactile feedback to the user

5 Axis 3D Optical Profilometer

Large Area 3D Optical Metrology System

3D Optical Module

Scanning Acoustic Microscop

Near-Field Infrared Microscopy

Solutions d’accessoires pour microscopes

200 kV aberration-corrected TEM/STEM

High Voltage TEM FEG (300kV)

High Voltage TEM (300kV)

Low Voltage TEM (120kV)

FIB-SEM System for True 3D Structural Analysis

FIP-SEM for large samples up to 200mm

Ultra-High Resolution Field Emission Scanning Electron Microscope

Ultra-High-Resolution Schottky Scanning Electron Microscope

Field emission & variable pressure scanning electron microscope

Tabletop Microscope

Compact Scanning Electron Microscope

Very Large Specimen Chamber Variable Pressure SEM

Variable Pressure Scanning Electron Microscope

Ultra-high Resolution Scanning Electron Microscope

Hitachi Ultrahigh-resolution Field-emission Scanning electron microscope

I/O modules in the industry standard sizes of mini, standard and G5.

Lines include rocker, paddle, toggle, pushbutton, and slide switches

Combination switches offer the versatility of combining performance with maximum space utilization

Would you like it in singular (system and controller) or plural as above?

Effortless Embedded Control Solutions

Controllable Drive Actuators

Camera elevation solutions that allow a camera to be positioned at heights from 6 ft. to 30 ft. above a vehicle roof

Pan and Tilt Positioner Controller with Real-Time Positioner Feedback

Light poles and tripods that are designed to work when you need them.

A complete line of standard and custom built telescopic masts

Magnetically detects the position of another moving part such as the shaft in a joystick or encoder

Man-Machine Interface (MMI) Controllers

A rugged solution for countless applications.

Rocker switches from Grayhill, available in industry standard designs to allow for easy integration.

Toggle Switches are available in industry standard designs to allow for easy integration.

CMOS based TEM cameras for high-end scientific imaging in Transmission Electron Microscopy

Hitachi Innovation for Hitachi Electron Microscopes. The Latest in Sample Preparation.

Easy-to-integrate Boards Provide Highly Accurate GNSS Positioning

Uninterrupted High-quality Measurements

Designed to connect one of eight inputs to a common output

8-Channel single-ended (1 of 8) multiplexers with fault protection

High-performance 128-channel multiplexer features a typical 300 krad (Si) total dose tolerance

Industrial and Military 3-Phase AC Line Filter Modules​

Three-phase brushless motor drivers and gate drivers

High-performance, high-precision, monolithic, CMOS analog multiplexer

DDR2 SDRAM Memory For Space

For high speed fibre channel connection

Board-to-Board interface to SuperMini Board-to-Board bullets only

Board-to-Board interface to SuperMini Board-to-Board bullets only

Scorpion brings a unique approach to modular connector design that is only available from Milexia partners Positronic.

Data Transfer Rectangular Connectors

Unlock high-speed ARINC 600 connectors via Milexia: 2+ Gbit/s for avionics Ethernet & video. Pan-EU supply, rugged reliability.

Waterproof and polarized, five or six pin electrical plugs/receptacles

Inmet inner DC blocks have a capacitor in-series with the center conductor

Offer flexibility, light weight, very high bandwidth, and forward compatibility.

ESA Space Qualified Backplane Connector

Rugged 2mm footprint cPCI backplane system

Series 04JT is a single pole, 4-way toggle switch with a tactile feel

a single pole, 4-way toggle switch with a pushbutton in the center position.

MIL qualified to exacting electrical, mechanical and environmental standards.

Series 8000 – The need for a hermetic class, MIL-DTL-5015 style connector existed long before this class was added to the Mil-Std.

The answer to the need for extreme harsh environment Hermetically Sealed interconnects

Commercial Avionics Utilities Software Suite

A wide assortment of quality ARINC 429 embedded and lab grade cards to support data bus development, validation, and the transfer

Marine Panel PC solutions adapted to strong constraints and respecting strong protection indexes, allowing to guarantee their reliability and robustness in the most extreme environments.

Panel PC solutions adapted to strong constraints and respecting strong protection indexes

Transceiver/Transformer Device

The SP’ACE RT II is a complete dual redundant MIL-STD-1553 Remote-Terminal Hybrid.

Designed to adapt to the majority of environments and business sectors.

Designed to adapt to the majority of environments and business sectors

Display solutions are designed to meet specific requirements in terms of robustness and precision.

Designed to meet specific requirements in terms of robustness and precision.

Robust and suitable for harsh environments where you need to be able to act quickly.

Robust and suitable for harsh environments where you need to be able to act quickly.

High performance, high reliability, compact size and low weight for Space Applications.

Lowest-Power, Multi-Core RISC-V SoC FPGAs

Lowest-Power, Low-Density FPGAs in Smallest Packages

More Resources in Low-Density Devices with the Lowest Power, Proven Security and Exceptional Reliability

Lowest-Power, Cost-Optimized, Mid-Range FPGAs

A growing line of I/O expanders, ranging from 6 to 100+ input/output ports, available in a variety of packages.

Make the Move to the High-Speed eSPI Standard In Your Existing LPC Industrial Computing Designs

System Management Simplified

Essential components to most modern-day computing systems.

The DSUB Family of products can operate with LED, VCSEL, or FP lasers.

Full space-qualified line of Box-Type MIL-STD-1553 data bus couplers.

Space-qualified line of In-Line MIL-STD-1553 data bus couplers.

Convert avionics messages in real time between Ethernet, MIL-STD-1553, and ARINC-429, in any direction, without a host computer.

Efficient, scalable, and portable platform to develop and test MIL-STD-1553 and ARINC 429 system applications via an Ethernet network

DDC’s Rugged Avionics Interface Computer (AIC) provides a flexible and scalable platform that supports a wide range of data network communications.

Compact Avionics Interface Computer (C-AIC) offers a completely customizable, off-the-shelf solution, that can be optimized for specific application requirements.

Low-Noise, 90 MHz Differential I/O Amplifier

45V, 2 MHz Zero-Drift Op Amp w/ EMI Filtering

The MCP6V77 family of operational amplifiers provides input offset voltage correction for very low offset and offset drift.

The PC Box Rail Din from Milexia is a compact industrial automation controller suitable for a wide variety of industrial IoT and automation applications.

The Din Rail PC Box is a compact industrial automation controller suitable for a wide variety of industrial IoT and automation applications.

A compact industrial automation controller suitable for a wide variety of industrial IoT and automation applications

Effortless Embedded Control Solutions

Capacitive Touch Controllers, Microcontrollers with Touch and 3D Gesture Controllers

Getac ZX10 G2: Ultra-light rugged Android tablet from Milexia. AI-ready, 1000-nit screen, -29°C to 63°C. Logistics & utilities essential.

The Synthesized Signal Generator (SSG) provides a low phase noise synthesized CW output in a small package.

Fully automated test instrument that sets and maintains a highly accurate ratio between a user-supplied carrier and internally generated White Gaussian noise.

A high performance antenna control system focused on multi-motor per axis, full motion antenna solutions.

It supports mono-pulse tracking capability and provides high precision and accuracy for dependable tracking performance in full motion applications.

An ideal drop-in replacement for ageing Vertex 7200 systems. As a retrofit option, the 8200 ACU is compatible with industry standard drive-cabinet interfaces and legacy position feedback devices, such as absolute rotary optical encoders, standard single-speed brush-less size 11 revolvers and two-speed brush-less size 20 revolvers.

The Smartellite™ Fixed terminal comprises patch antennas and a built-in MODEM, providing a rigidized, all-in-one solution. The unique design allows independent configuration and installation by the end-user.

Satellite Terminal for GEO & LEO on the move connectivity, works with a dedicated free app turns any iOS or Android smartphone into a satphone.

Getac VGPS (Virtual Global Positioning System) Utility replicates the physical GPS data to multiple COM ports to help ensure operational efficiency.

The KeyWedge Barcode Reader Utility expands the capability of any Getac rugged device with a rear camera.

Getac Driving Safety Utility reduces distractions with its screen blanking function, in order to help drivers stay focused, keeping them safe.

GDMS is a software solution that tracks and monitors devices, identifying issues before they impact on field-based personnel.

Getac X600 G1: Rugged 15.6″ workstation w/ Intel 11th Gen, RTX3000 GPU & -29°C ops. Milexia supplies Europe-wide.

Getac V110 G7: Rugged 11.6″ convertible from Milexia. 12th Gen Intel, 1000 nits, -29°C to 63°C. Field-ready for safety & utilities.

Getac S410 G5: Semi-rugged laptop with Intel 13th Gen, 1000-nit display & extreme durability. Milexia supplies across Europe.

Getac B360 RUGGED LAPTOP: AI-powered rugged laptop from Milexia. Survives extremes, 1400-nit screen, Intel Core Ultra.

The 10.1″ display UX10 rugged tablet is versatile and portable, ready to deliver digital transformation in environments where rugged performance is required.

ATEX zone 2 certified. With a 12.5” FHD display, K120-Ex tablet offers powerful computing for use in extremely harsh environments.

With a diverse selection of operation modes, its robust display capabilities and choice of accessories, the K120 fully rugged tablet is perfect for extensive use in various harsh environments. 

The rugged Getac F110 tablet combines leading performance, security, and mobility with its 11.6″ screen and lightweight design.

3D101 Series with a 10.1-inch display meet the ISO and ANSI specifications

10.4-inch Display for Vehicles, ideal for gauges, diagnostics, cameras, guidance and other vehicle functions

Easily display custom graphic icons, text boxes and active gauge elements.

The 3KG2 Series 2nd generation MMI CANbus keypads have the same benefits of the legacy products with added new features

CANbus Keypads suitable for off-road vehicles in Agriculture and Construction.

The AQF-30 series is a new range of fully encapsulated 30 W AC-DC power supply modules, featuring EMI emission EN 55011/32 class B approved and EMS compliance to EN 61000-4 standard.

A range of ultra-small, fully encapsulated 5 Watt AC-DC power supply modules

Fully encapsulated AC-DC power supply modules

The AAF-03 Series is a range of ultra-small, fully encapsulated 3 Watt AC-DC power supply modules.

A range of high performance DC-DC converter modules with 6W output power.

Cost-optimised 10W isolated DC-DC converter within an encapsulated DIP-24 package.

Grayhill Series 50-51 0.5″ Diameter, 200mA, .698″ Behind Panel

Single Deck Rotary Switch with 2″ Diameter and 15 Amp

Rotary Switch – Multi-Deck with 0.5″ Diameter, 1/4 Amp Standard, Military SR13

The Grayhill touch Encoder combines the functionality of traditional touch displays, keyboards, and rotary switches.

The MIW10M series is a high performance 10W medical approved DC-DC converter within encapsulated DIP-24 package designed for medical applications.

The PD-9004G provides up to 30 Watts of power over Ethernet and offers a IEEE 802.3at-compliant solution.

Microchip’s PD-9001GR is a single-port, high-power solution for remote powering of current and emerging high-power applications.

The twelve port PoE midspan provides up to 15.4 Watts of power over Ethernet and offers a IEEE 802.3af-compliant solution

The PD-3501G offers a compact and cost effective, IEEE 802.3af compliant solution for powering IP phones, WLAN access points, network cameras.

An outdoor PoE switch that enables the connection of four powered devices to a network such as an outdoor WLAN, outdoor IP camera, or outdoor P2P radio

The PDS-408G digital ceiling PoE switch offers an optimal and cost-effective solution for PoE application like PoE lighting and other digital ceiling applications.

The high efficiency XL330-54 Series provide up to 91% efficiency and can reduce energy losses by up to 50%.

With an overall height of 1.43″ and a 3″ x 5.3″ footprint, the XL280 Series boasts a power density over 13 watts per cubic inch

Advanced digital controller – the XL275 is the first power supply in this class to use a digital microcontroller to supervise the unit’s operation.

State of the Art Digital Controller –
the XL270 is the first power supply in this class to use two digital signal processors to control the unit’s operation.

One of the smallest 100 Watt power supplies on the market, also available in a choice of four different packages to suit diverse power application requirements

One of the smallest 65 Watt power supplies on the market, available in a choice of four different packages to suit diverse application requirements

One of the smallest 40 Watt power supplies on the market, available in a choice of four different packages to suit diverse application requirements.

All models of the XLM 500 series can be used as standalone power supplies and have different chassis options

All models of the XLM 240 series can be used as standalone power supplies and have different chassis options

25W to 40W The latest evolution of the IBUC has all of the advanced features and reliability of the original IBUC in a new, more compact package available in Ku-band

These broadband capacitors are intended primarily for coupling RF signals or, occasionally, for bypassing them to ground while blocking DC.

Outdoor WiFi access point for multi-bearer applications

High Shock Vibration Oscillators operate in harsh environments.

6/5/7 segment Carbon Fiber Antenna

1 case – IATA compliant

Features:
Integrated BUC/LNB
Sand feet
X, Ku and Ka-Band (interchangeable)
Up to 16W RF Power
MPAD3 – Beacon receiver
Integrated IP Modem

Microchip’s new BlueSky GPS Firewall protects already deployed GPS systems by providing a cost-effective overlay solution installed between existing GPS antennas and GPS systems.

API Inmet’s Gain Equalisers solve your system slope problems. Offering negative, positive or parabolic slope units to meet your desired performance.

1.5M Multi-band X, Ku and Ka-Band

Features:
X / Ku / Ka-Band tri-feed
Quick change feed cassette (X / Ku / Ka)
Integrated BUC, LNB and waveguide
Up to 80W X-Band / 50W Ku-Band / 20W Ka-Band
Full auto-pointing capability

Quantum Miniature Rubidium Atomic Clock (MAC) features a compact design and low power consumption.

SignalCore RF Upconverters are designed to meet today’s demanding wireless applications.

SignalCore signal sources are designed to meet demanding RF and microwave applications in academia, military, and commercial markets.

The MPT1000 is the world’s first truly multiband compact flyaway with outstanding operation in X and Ku-Bands with integrated antenna, RF BUC and auto-acquire ACU.

The QD77 is the latest in Holkirk’s Ka-Band satellite terminal family and has been designed to access the pan European Eutelsat Ka-Sat network.

Mercury System’s narrow band amplifier series exhibit outstanding performance. Proven designs with noise figures below 0.5dB, output P-1dB in excess of several watts and excellent linearity.

Coaxial switches from RLC Electronics, covering the frequency dc-65GHz.

The modular Microchip SyncServer S650 combines the best of time and frequency instrumentation with flexibility and powerful security features.

Microchip Technology Incorporated SyncServer S600 provides modern networks with accurate, secure, and reliable time services.

Novella SatComs frequency downconverters are based on an L-band to VHF (70 or 140MHz) module built on a single PCB.

Novella SatComs frequency upconverters are based on a VHF (70 or 140MHz) to L-Band module built on a single PCB.

Novella SatComs tracking receivers have been designed to track and measure pilots or beacons of all known commercial and military satellites.

DVB-S2X multi-carrier satellite gateway

80W, to 400W in C, Ku and Ka-Band. Terrasat’s revolutionary IBUC G has advanced features and a Gallium Nitride (GaN) amplifier for increased efficiency.

A 5W to 16W low energy consumption solution for use with modems equipped with limited capacity BUC power supplies (DC power supplied via IFL coax), available in C and Ku-band

4W to 80W The latest evolution of the IBUC has all of the advanced features and reliability of the original IBUC in a new, more compact package available in C, X and Ku-band from 4W to 80W

60W to 200W The IBUC R is an integrated BUC/GaAs SSPA designed for higher performance & reliability available in C, X and Ku-Band.

Over 400 coaxial, surface mount, and MMIC attenuator models – available in France, Italy and Spain

Holkirk’s terminals are ideal for store and forward, breaking news, occasional or permanent use, with uplink speeds in excess of 10Mbps.

1.5M Ku-Band

Features:
Up to 400W TWT in 1:1 configuration
1:1 250W GaN SSPA
Fully integrated BUC control in AIM controller
Full auto-pointing capability
Fits onto any vehicle

La serie RM di antenne digitali per la raccolta di notizie via satellite (DSNG) di Holkirk è progettata per eccellere nell’esigente ambiente DSNG odierno.

1,2M – 1 SMC antenna

1 case – NON IATA compliant

Features:
1.2M quick deploy antenna system
Tool-less assembly
Pointing assistant (easy, no experience required)
All equipment supplied for internet connection
Fast and accurate assembly for pointing
Single case for complete system (antenna, modem, 25M L-Band cables)

The Broadcast variant of the TP100 is an ultra-fast, quick-deployable antenna systems from Holkirk Communications, comprising a 16W or 55W BUC and wide-band LNB.

An IATA compliant system with a compact 1.5m reflector and capacity for up to 400W HPA.

1,2M – 6 segment Carbon Fiber antenna
Eutelsat Characterised

4 cases – IATA compliant

Options:
Integrated BUC/LNB
Auto-acquire with GPS
Sand feet
X, Ku and Ka-Band dual/Tri-band
MPAD3 – Beacon receiver
Integrated IP Modem
Cross-site RF over fibre
Customised electronics

The CDM-760 Advanced High-Speed Trunking Modem builds on Comtech EF Data’s award-winning family of high-speed, ultra efficient trunking modems.

Next generation satellite modems providing industry-leading performance and flexibility.

The CDM-625 Advanced Satellite Modem builds on Comtech EF Data’s legacy of providing the most efficient satellite modems.