Produkte aus Produkte aufgelistet nach Partner

Globes partners Link Microtek design and build our own products or develop components and systems to client specifications.

Innovative solutions for microwave applications

The BJES10 Q-band Redundant LNA system

700 MHz to 40 GHz

350 MHz to 20 GHz

500 MHz – 50 GHz

0.050 GHz – 32 GHz

700 MHz – 40 GHz

Familiar light-blue Narda-Miteq brand delivers new benefits in complementary product family.

Featuring 1 Watt Output over Multi-Octave Bandwidth, Integrated Protection and On/Off Capability, Combined with Low Noise Figure.

RF Noise Generators

RF Signal Generators

Phase Noise Analyzer

The HS9000 Series is a unique platform allowing the user to specify custom configurations for a COTS product.

LC-4000 Series has been specially designed for satellite earth station receiver front ends and other telecommunications applications

Compact, lightweight IoT terminals that feature a tightly integrated satellite modem and flat-panel antenna design in Ku- and Ka-band variants.

C, X, Ku and Ka-Band

Ku-Band 200W/250W Block Up-Converter (BUC)

Single/Dual Ka-Band LNB

Ka-Band Satcoms-on-move (SOTM) Antenna System

Low profile design (waveguide array)
Tuneless architecture
Wide-band performance (19.2-21.2 GHz and 29-31 GHz)
40W BUC

The latest evolution of the IBUC has all of the advanced features and reliability of the original IBUC in a new, more compact package available in Ku-band, 8W to 16W

5W-125W Mid-Power BUC from Milexia partner Terrasat.

Ku-Band Dual Band LNBs from RevGo

20W Ka-Band BUCs from RevGo

20W Ka-Band BUCs from RevGo

6W, 10W Ka-Band VSAT BUCs from RevGo

20W, 40W C-Band Block Up-Converters (BUC) from Milexia partner RevGo

4 Port PoE, 2 Port SFP, 90W Per Port, IEEE 802.3bt-compliant, IP67-Rated Outdoor PoE Switch.

Optical Encoders and Hall Effect Products

Rotary Switch, 5 Position, 2 Pole, 36 °, 200 mA, 115 V, 56

13 MHZ TO 5.8 GHZ | UP TO 1.7KW

eVNA: 6 GHz USB Vector Network Analyzer

A low cost, compact sensor-head that turns any PC with a USB port into a true RMS power meter for CW (continuous waveform), modulated and multi-tone signals.

SPDT, DPDT (transfer), SP4T, SP6T, SP8T, and SP10T mechanical and solid state RF switches

Reliable dissipation of signal power for 50-Ohm and 75-Ohm systems from DC to 65 GHz.

Voltage Controlled Oscillators (VCOs) from spot frequency and narrow band to medium and wide bandwidths

Low-Pass, High-Pass, Band-Pass, Band-Stop, Diplexers and Triplexers

For gain flattening and frequency-dependent loss compensation in a wide range of applications

Wideband DC blocks with SMA, N-type, BNC and 2.92mm connector types

Directional, bi-directional, dual-directional and RF Taps

Coaxial and surface mount bias tees for DC current up to 5 Amps and RF bandwidths spanning 100 kHz to 54 GHz

Amplifiers used in RF and microwave systems to boost signal power from input to output.

With over 30 year’s experience, Milexia is the European MASTER distributor for all CPI (formally PRODELIN) Antenna Technologies products with a fully stocked warehouse, ready for immediate dispatch across Europe and beyond.

1.8 Meter VSAT Rx/Tx Antennas

2.4 Meter VSAT Rx/Tx Antennas.

3.8 Meter VSAT Rx/Tx Antennas

The 5071B primary time and frequency standard is a replacement for the 5071A that matches the form, fit and functions of its predecessor.

Real-Time Peak Power Sensor

USB RF Peak Power Sensor, 50 MHz to 6 GHz

Real-Time Peak USB Power Sensors

RF Power Meter

Swedish Microwave  Low Noise Amplifiers (LNAs) for satellite communications.

AA MCS specializes in the design and manufacturing of broadband power amplifiers based on GaN technology.

Milexia partners Narda-MITEQ design and manufacture a wide range of low noise amplifiers (LNAs)

Surface Acoustic Wave (SAW) devices

Low cost Passive and Passive Self-Pumping Dehydrators

Low pressure Air Dehydrator for indoor and outdoor applications

The Mission Microwave 200 watt Ku-Band Titan BUC is routinely used on high capacity Ku band transportable and multi-carrier gateways. 

Mission Microwave 100 watt Ku-Band Javelin excels  in harsh environments and is routinely deployed on in both commercial and government

Ku-Band 25 watt Cube BUC make it an obvious choice for mission critical VSATs and SATCOM terminals.

The Mission Microwave 400 watt X-Band MOAB BUC shares a common electrical and control interface with with the Ku-Band MOAB

The Mission Microwave 100 watt X-Band Stinger BUC shares a common electrical and control interface with with the Ka- and Ku-Band Stinger BUCs

The Mission Microwave 80 watt X-Band Stinger BUC shares a common electrical and control interface with with the Ka- and Ku-Band Stinger  BUCs

The Mission Microwave 50 watt X-Band Stinger BUC produces 44.5 dBm of single carrier linear power in an ultra compact and reliable package.

The Mission Microwave  40 watt X-Band Cube BUC shares a common electrical and control interface with with the Ka- and Ku-Band Stinger  BUCs and is frequently used in a multi-band terminal families.

The industry’s most compact & lightweight 400W solid state power amplifier.

The Mission Microwave Ka-Band 12 watt Dart BUC provides 12 watts of rated power in a a 2.4 lb package.

The Titan is a primary source for replacing TWT SSPA’s and BUC’s on transportable terminals and Ka-Band gateways.

Ku-band Tracking Receivers have been designed to track and measure pilots or beacons of all known commercial and military satellites.

Novella SatComs B650 Series X-band Tracking Receiver have been designed to track and measure pilots or beacons of all known commercial and military satellites.

Novella SatComs B550 Series – C-band Tracking Receivers have been designed to track and measure pilots or beacons of all known commercial and military satellites.

Radiation tolerant

Ruggedized high-power IGBT modules

Ruggedized discrete IGBTs

MIL -PRF-19500

MIL-PRF-19500

Surface mount or flush mount enclosures

Adjustable and fixed outputs and spatial level screening

Radiation-resistant

Standard hermetic power mosfets

S-band Tracking Receiver for antenna tracking of NATO / Skynet / DSCS military beacons.

L-band Tracking Receiver for antenna tracking of NATO / Skynet / DSCS military beacons.

UHF Tracking Receiver for antenna tracking of NATO / Skynet / DSCS military beacons.

LNBs from Swedish Microwave for Professional satellite communication to meet the highest demands.

Norsat’s range of LNB’s include single and multi LO (Local Oscillator) across C, Ku, Ka, X and Q-band frequencies.

Ka-Band Dual Band LNBs from RevGo are produced to stringent quality standards using an ISO9001:2015 quality system.

40W, 60W, 80W, 100W, 200W, 250W Ku-Band – SNG/earth-station BUCs from RevGo

3W, 4W, 6W, 8W Ku-Band VSAT BUCs from RevGo are produced to stringent quality standards using an ISO9001:2015 quality system

5W, 8W, 20W, 40W C-Band Block Up-Converters (BUC) from Milexia partner RevGo

16W, 30W, 40w, 60W Ku-Band BUC’s from RevGo are produced to stringent quality standards using an ISO9001:2015 quality system.

A dual-purpose modem. The H-Plus can be used as a Point-to-Point SCPC modem or can be purposed as a mid-tier Heights Remote Gateway.

A dual-purpose modem that can be used as a Point-to-Point SCPC modem or as a mid-tier Heights Remote Gateway.

Remote Gateway – Low to Medium Throughput, for Dynamic SCPC mode of operation, upgradable to H-DNA

Supports multiple remote to hub throughput tiers up to 10 Mbps, which is managed via a centralized licensing capability.

An ultra-light uplink solution from milexia that can be used with our range of Eutelsat broadcast uplink FLY / DRIVE solutions

Networking Platform from ComTech is engineered to elevate your services with unparalleled horsepower, efficiency and intelligence.

Supports a wide range of fixed IP services, including Internet/ intranet access, VoIP, enterprise connectivity, maritime and multicasting services.

Novella Satcoms Block Downconverter typically used for frequency translation from (to) L-band to (from) SHF (C, X, Ku, DBS and Ka bands).

Novella Satcoms Block Upconverter typically used for frequency translation from (to) L-band to (from) SHF (C, X, Ku, DBS and Ka bands).

Novella SatComs frequency downconverters are based on an L-band to VHF (70 or 140MHz) module built on a single PCB.

Novella SatComs frequency upconverters are based on a VHF (70 or 140MHz) to L-band module built on a single PCB.

The iQ 200 Rackmount combines high-performance iQ series features with mobility and can reach throughputs over 300 Mbps when being used in L2oS mode.

A compact, low power consumption modem

Models for antenna tracking of NATO / Skynet / DSCS military beacons

Inclined-Orbit Tracking Antenna System that provides a simple, robust and accurate solution for small antenna positioning and inclined orbit tracking in C, X Ku and Ka-Band.

This can be retro-fitted to a CPI mount for upgraded to inclined orbit tracking.

Antenna Interface Module (AIM) from Holkirk is a fully mobile ACU that has been designed to be user friendly, taking users through he acquisition process step by step.

This ACU can be supplied as part of any Holkirk atenna or as a retro-fit to existing antenna systems as part of a project.

1,0M – 5 segment Carbon Fiber antenna

2 cases – IATA compliant

Options:
Integrated BUC/LNB
High wind stabilisation kit
Sand feet
Ku and Ka-Band dual band
MPAD3 – Beacon receiver
Integrated IP Modem

1,5M – 8 segment Carbon Fiber antenna

5 cases – IATA compliant

Options:
Integrated BUC/LNB
Auto-acquire with GPS
Sand feet
X, Ku and Ka-Band dual/Tri-band
MPAD3 – Beacon receiver
Integrated IP Modem
Cross-site RF over fibre
Customised electronics

Dedicated technical support and through life firmware management

24 ports, 30W, IEEE 802.3at-compliant, indoor PoE midspan, managed

Multi-port 802.3af Compliant Midspan Family With Network Management System

24ports,60W,multigig,bt-compliant PoE midspan

Rapid, Multi-function, Precision Oscillator Characterization

Support for multiple signal formats

1×15 RF Distribution Amplifier RoHS Compliant

1×15 Pulse Distribution Amplifier 5V Output

Small 1588 PTP GM for Outdoor Scenarios

GPS Synchronized, PCI Time & Frequency Processor

GPS Referenced PCI Express Time & Frequency Processor

PCI Express Time and Frequency Processor

PCI Time and Frequency Processor

A stable and accurate frequency reference with multiple output signal formats in a 1U rackmount chassis.

Extreme Low Phase Noise and Frequency Stability for precise timekeeping and metrology applications.

RoHS Commercial Cesium Frequency Standard

Cesium Clock Primary Frequency Standard

Fully ruggedised, Integrated GPS NTP Time Server.

Precise Timing Grandmaster with Gateway Clock, PRTC-B, High-Performance Boundary Clock, Enhanced PRTC & Redundancy

60cm – 6 segment Carbon Fiber antenna

1 case – IATA compliant

Features:
Integrated BUC/LNB
Sand feet
Ku-Band
Up to 16W RF Power
MPAD3 – Beacon receiver
Integrated IP Modem (IQ200/MDM2510)

The MAC-SA5X is designed for applications that require long-term atomic oscillator stability, but are constrained by size and low power requirements.

An unmatched combination of breakthroughs – reduced size, weight and power consumption brings the accuracy and stability of atomic clocks to portable applications

I/O modules in the industry standard sizes of mini, standard and G5.

Toggle Switches are available in industry standard designs to allow for easy integration.

Man-Machine Interface (MMI) Controllers

A rugged solution for countless applications.

Rocker switches from Grayhill, available in industry standard designs to allow for easy integration.

a single pole, 4-way toggle switch with a pushbutton in the center position.

MIL qualified to exacting electrical, mechanical and environmental standards.

Series 04JT is a single pole, 4-way toggle switch with a tactile feel

A wide assortment of quality ARINC 429 embedded and lab grade cards to support data bus development, validation, and the transfer of flight-critical data aboard civil aerospace platforms. DDC’s scalable high-channel density ARINC PMC and XMC cards offer advanced functionality, including full built-in-test and programmable interrupt capabilities, while providing high MTBF, and high performance for […]

Commercial Avionics Utilities Software Suite

Transceiver/Transformer Device

The SP’ACE RT II is a complete dual redundant MIL-STD-1553 Remote-Terminal Hybrid.

High performance, high reliability, compact size and low weight for Space Applications.

Lowest-Power, Low-Density FPGAs in Smallest Packages

More Resources in Low-Density Devices with the Lowest Power, Proven Security and Exceptional Reliability

Lowest-Power, Cost-Optimized, Mid-Range FPGAs

A growing line of I/O expanders, ranging from 6 to 100+ input/output ports, available in a variety of packages.

Make the Move to the High-Speed eSPI Standard In Your Existing LPC Industrial Computing Designs

System Management Simplified

Essential components to most modern-day computing systems.

The DSUB Family of products can operate with LED, VCSEL, or FP lasers.

Full space-qualified line of Box-Type MIL-STD-1553 data bus couplers.

Space-qualified line of In-Line MIL-STD-1553 data bus couplers.

Convert avionics messages in real time between Ethernet, MIL-STD-1553, and ARINC-429, in any direction, without a host computer.

Efficient, scalable, and portable platform to develop and test MIL-STD-1553 and ARINC 429 system applications via an Ethernet network

DDC’s Rugged Avionics Interface Computer (AIC) provides a flexible and scalable platform that supports a wide range of data network communications.

Compact Avionics Interface Computer (C-AIC) offers a completely customizable, off-the-shelf solution, that can be optimized for specific application requirements.

Low-Noise, 90 MHz Differential I/O Amplifier

45V, 2 MHz Zero-Drift Op Amp w/ EMI Filtering

The MCP6V77 family of operational amplifiers provides input offset voltage correction for very low offset and offset drift.

Lowest-Power, Multi-Core RISC-V SoC FPGAs

So many jobs in the laboratory require a good quality synthesized RF signal generator used solely as a CW source. The Synthesized Signal Generator (SSG) provides a low phase noise synthesized CW output in a small package. Applications A general purpose laboratory workhorse Frequency hopping CW LO for frequency converters Test source for device characterization […]

Fully automated test instrument that sets and maintains a highly accurate ratio between a user-supplied carrier and internally generated White Gaussian noise.

The Satellite Link Emulator from dBm provides a cost-effective, time-saving, repeatable total solution for satellite to ground station RF link testing.

A high performance antenna control system focused on multi-motor per axis, full motion antenna solutions.

It supports mono-pulse tracking capability and provides high precision and accuracy for dependable tracking performance in full motion applications.

An ideal drop-in replacement for ageing Vertex 7200 systems. As a retrofit option, the 8200 ACU is compatible with industry standard drive-cabinet interfaces and legacy position feedback devices, such as absolute rotary optical encoders, standard single-speed brush-less size 11 revolvers and two-speed brush-less size 20 revolvers.

Ultra lightweight GaN tech

Satellite Fixed installation Terminal for IoT and Voice & Data

Satellite Terminal for GEO & LEO on the move connectivity, works with a dedicated free app turns any iOS or Android smartphone into a satphone.

Satellite Portable Terminal for IoT and Voice & Data

3D101 Series with a 10.1-inch display meet the ISO and ANSI specifications

10.4-inch Display for Vehicles, ideal for gauges, diagnostics, cameras, guidance and other vehicle functions

Easily display custom graphic icons, text boxes and active gauge elements.

CANbus Keypads suitable for off-road vehicles in Agriculture and Construction.

The 3KG2 Series 2nd generation MMI CANbus keypads have the same benefits of the legacy products with added new features

Fully encapsulated AC-DC power supply modules, featuring EMI emission EN 55011/32 class B approved & EMS compliance to EN 61000-4 standard.

A range of ultra-small, fully encapsulated 5 Watt AC-DC power supply modules

Fully encapsulated AC-DC power supply modules

The AQF-30 series is a new range of fully encapsulated 30 W AC-DC power supply modules, featuring EMI emission EN 55011/32 class B approved and EMS compliance to EN 61000-4 standard.

A range of high performance DC-DC converter modules with 6W output power.

Cost-optimised 10W isolated DC-DC converter within an encapsulated DIP-24 package.

Grayhill Series 50-51 0.5″ Diameter, 200mA, .698″ Behind Panel

The AAF-03 Series is a range of ultra-small, fully encapsulated 3 Watt AC-DC power supply modules.

Single Deck Rotary Switch with 2″ Diameter and 15 Amp

Rotary Switch – Multi-Deck with 0.5″ Diameter, 1/4 Amp Standard, Military SR13

The MIW10M series is a high performance 10W medical approved DC-DC converter within encapsulated DIP-24 package designed for medical applications.

Either with fully discrete custom design or with Vicor COTS module integration, Power System Technology will help you to lower the design cycle, engineering costs and provide the benefit of high technology.

The PD-9004G provides up to 30 Watts of power over Ethernet and offers a IEEE 802.3at-compliant solution to upgrade existing infrastructure with PoE, ensuring safe operation of any standard PoE data terminal.

The twelve port PoE midspan provides up to 15.4 Watts of power over Ethernet and offers a IEEE 802.3af-compliant solution to IP telephones, wireless LAN access points, security network cameras and many other types of data terminals over standard Ethernet data cables, leaving network infrastructure completely unaltered. With the midspan’s plug-and-play installation, it can be […]

The PD-3501G offers a compact and cost effective, IEEE 802.3af compliant solution for powering IP phones, WLAN access points, network cameras and other IP terminal devices.

An outdoor PoE switch that enables the connection of four powered devices to a network such as an outdoor WLAN, outdoor IP camera, or outdoor P2P radio

The PDS-408G digital ceiling PoE switch offers an optimal and cost-effective solution for PoE application like PoE lighting and other digital ceiling applications.

The single port PoE midspan provides up to 30 Watts of power over Ethernet and offers a IEEE 802.3at-compliant  solution for powering IP phones, WLAN access points, network cameras and other IP terminal devices.

The PST23 is a compact DC-DC converter in chassis mount format, incorporating input filtering, input and output protections, robust mechanical mounting and connection and optional conformal coating required for industrial and railway applications. The converter provides high reliability thanks to the integration of Vicor Corp. modules, high efficiency, input-to-output isolation, soft start, over temperature protection, […]

The PST22 is a compact DC-DC converter in an eurocard format, incorporates input and output protection and filtering, signalling features, which are required in industrial and railway applications.

A robust mechanical package and connection required in severe environments including industrial and defence.

A compact DC-DC converter incorporates input filtering, input and output protections, robust mechanical mounting and connection, required in most of the severe environment for industrial, railways, defence applications.

With an overall height of 1.5″ and a 3.3″ x 5″ footprint, the XL375 Series boasts a power density over 15 watts per cubic inch. It is ideally suited for OEMs using the industry standard 1U chassis. Highlights • 375 W AC-DC • Up to 93% efficiency • High power density: Over 15W/cu in. • […]

The high efficiency XL330-54 Series provide up to 91% efficiency and can reduce energy losses by up to 50%. This unique design also generates less wasted heat—reducing the need for forced air cooling, decreasing AC power consumption, increasing reliability, and maximising its economy of operation. The main output is enabled whenever all of the required […]

Advanced digital controller – the XL275 is the first power supply in this class to use a digital microcontroller to supervise the unit’s operation.

State of the Art Digital Controller –
the XL270 is the first power supply in this class to use two digital signal processors to control the unit’s operation.

The XL100 is not only one of the smallest 100 Watt power supplies on the market, it is also available in a choice of four different packages to suit diverse power application requirements

The XL65 is not only one of the smallest 65 Watt power supplies on the market, it is also available in a choice of four different packages to suit diverse application requirements

One of the smallest 40 Watt power supplies on the market, the XL40 series is available in a choice of four different packages to suit diverse application requirements.

The RCB1200 features active PFC, redundancy and external control options in an ultra small form factor. Active PFC EN61000-3-2 compliant

The RCB600 is a modular, configurable multi-output power solution offering unrivaled performance and flexibility.

All models of the XLM 500 series can be used as standalone power supplies and have different chassis options – XLMO500 for Open frame, XLMU500 for U Chassis, and XLME500 for Enclosure. Highlights • 500 W AC-DC • High efficiency up to 94% • With P.F.C. function > 0.94 • Built-in 12 V / 0.3 […]

All models of the XLM 240 series can be used as standalone power supplies and have different chassis options – XLMO240 for Open frame, XLMU240 for U Chassis, and XLME240 for Enclosure. Highlights • 240 W AC-DC • Up to 94% efficiency • With P.F.C. function > 0.9 • < 0.5 W no load input […]

The MCB600 medical power supplies consist of an input chassis that provides four medically isolated slots for up to four output modules of any type and in any combination.

Ultra small, high efficiency power supplies. With an overall height of 1.43″ and a 3″ x 5.3″ footprint, the XL280 Series boasts a power density over 13 watts per cubic inch. It is ideally suited for OEMs using the industry standard 1U chassis. The main output is enabled whenever all of the required startup conditions […]

All IBUCs allow the operator to customise configurations and manage alarms and sensors for network management and control.

Outdoor/Ruggedised IP modems available from Milexia. Packages for standard satellite routers enable operation in harsh, dusty and wet environments.

High Shock Vibration Oscillators operate in an environment such as in avionics, missiles, vehicles, construction equipment and industrial applications, the oscillator must be specially designed to both survive and operate in these environments. When designing for survival in harsh environments, the designer must be concerned about both the crystal design and the oscillator design. It […]

The Scorpion manpack terminal has been designed to provide the ultimate in reliable, secure and mobile communication. Supplied in X, Ku or Ka-Band.

Microchip’s new BlueSky GPS Firewall protects already deployed GPS systems by providing a cost-effective overlay solution installed between existing GPS antennas and GPS systems.

These broadband capacitors are intended primarily for coupling RF signals or, occasionally, for bypassing them to ground while blocking DC.

API Inmet’s Gain Equalisers solve your system slope problems. Offering negative, positive or parabolic slope units to meet your desired performance.

The DRM150 antenna is an ultra-compact tri-band system which encompasses the drive control, positioning hardware and beacon receiver into the fully sealed and aerodynamic antenna enclosure.

SignalCore signal sources are designed to meet demanding RF and microwave applications in academia, military, and commercial markets.

Reactel Cavity Filters are designed to meet the most stringent requirements with low loss and high selectivity.

The QD77 is the latest in Holkirk’s Ka-Band satellite terminal family and has been designed to access the pan European Eutelsat Ka-Sat network.

The 25W Stinger Ka-Band Block Upconverter is the industry’s smallest and lightest weight 25W solid state power amplifier at Ka-Band.

SignalCore RF Upconverters are designed to meet today’s demanding wireless applications.

Mission Microwave’s Javelin Block Upconverter is the industry’s most compact and lightweight 100W solid state power amplifier.

The 55W Stinger Block Upconverter is the industry’s smallest & lightest weight 55W solid state power amplifier.

Mercury System’s narrow band amplifier series exhibit outstanding performance. Proven designs with noise figures below 0.5dB, output P-1dB in excess of several watts and excellent linearity.

Bias tees allow the insertion of DC voltages into a signal path without disrupting the existing signal in that path.

Coaxial switches from RLC Electronics, covering the frequency dc-65GHz.

Microchip’s accurate, secure and flexible time and frequency standard.

Microchip’s high performance, enhanced security, network time server.

Mission Microwave’s Javelin Block Upconverter is the industry’s most compact and lightweight Ka-Band 50W solid state power amplifier.

Novella SatComs frequency upconverters are based on a VHF (70 or 140MHz) to L-Band module built on a single PCB.

Novella SatComs tracking receivers have been designed to track and measure pilots or beacons of all known commercial and military satellites.

Novella SatComs frequency downconverters are based on an L-band to VHF (70 or 140MHz) module built on a single PCB.

DVB-S2X multi-carrier satellite gateway

IBUC 2e Ku-Band intelligent block upconverter – low energy consumption model.

The IBUC R has all of the advanced IBUC features and the upgraded RJ45 M&C connector.

The latest evolution of the IBUC has all of the advanced features and reliability of the original IBUC in a new, more compact package.

Over 400 coaxial, surface mount, and MMIC attenuator models – available in France, Italy and Spain

Holkirk Communication’s RM150 is a Eutelsat characterised DSNG antenna designed to excel in today’s demanding DSNG environment.

The RM series of digital satellite news gathering (DSNG) antennas from Holkirk are designed to excel in today’s demanding DSNG environment.

The QDV-120 Eutelsat approved is a rugged and reliable 1.2m antenna and mount which will operate in the Ku band frequency.

An IATA compliant system with a compact 1.5m reflector and capacity for up to 400W HPA.

An IATA compliant system with a compact 1.5m reflector and capacity for up to 400W HPA – ready to cover a news story anywhere in the world.

Terrasat’s revolutionary IBUC G has advanced features and a Gallium Nitride (GaN) amplifier for increased efficiency.

The CDM-760 Advanced High-Speed Trunking Modem builds on Comtech EF Data’s award-winning family of high-speed, ultra efficient trunking modems.

Next generation satellite modems providing industry-leading performance and flexibility.

The CDM-625 Advanced Satellite Modem builds on Comtech EF Data’s legacy of providing the most efficient satellite modems.